Description
Dual Mesh Replacement Pods for the OXVA NeXLIM
The OXVA NeXLIM Replacement Pod is a 3-pack of refillable cartridges built exclusively for the OXVA NeXLIM pod system. Each pod holds 4mL of e-liquid and features a built-in dual mesh coil powered by Unitech 2.0 technology, delivering richer flavour and longer coil life than standard single-mesh pods. Available in 0.6 ohm, 0.8 ohm, and 1.2 ohm resistances, these pods cover everything from tight mouth-to-lung draws to open restricted direct-to-lung vaping.
Compatibility: These pods are designed exclusively for the OXVA NeXLIM. They are not compatible with the XLIM Pro 3, XLIM GO 2, or any other OXVA XLIM device. XLIM pods do not fit the NeXLIM either. Each pod has a built-in coil that cannot be replaced separately. When the coil wears out, replace the entire pod.
Why Vapers Choose NeXLIM Pods
Dual Mesh Coil Technology
Unlike standard single-mesh pod coils, each NeXLIM pod uses two integrated mesh coils that heat your e-liquid from a larger surface area. This dual-coil design produces noticeably richer flavour and denser vapour compared to older OXVA pod designs. In Boost mode on the NeXLIM device, both coils fire simultaneously for maximum intensity. In Eco mode, they alternate to extend pod and battery life.
15+ Refills Per Pod
OXVA engineered these pods with Unitech 2.0 wicking technology and a 5-layer leak-proof structure that significantly extends coil life. Each pod supports more than 15 refills before flavour begins to degrade, which is roughly double the lifespan of most competing pod cartridges. At 4mL per fill, that translates to 60mL or more of e-liquid per pod.
4mL Top-Fill Capacity
The 4mL pod capacity is larger than most pod systems on the market and reduces the frequency of refills throughout the day. The top-fill silicone stopper provides mess-free refilling without removing the pod from the device. The clear PCTG body lets you monitor e-liquid levels at a glance.
3 Resistance Options for Every Vaping Style
Choose from 0.6 ohm for restricted direct-to-lung (RDL) vaping with bigger clouds, 0.8 ohm for a versatile all-rounder between MTL and RDL, or 1.2 ohm for a tight mouth-to-lung (MTL) draw closest to a cigarette-style experience. All three resistances use the same dual mesh coil platform.
5-Layer Leak-Proof Design
OXVA’s 5-layer anti-leak construction creates multiple barriers between the e-liquid chamber and the airflow path. This keeps your device clean and your pockets dry, even when carrying the NeXLIM horizontally in a bag or pocket throughout the day.
3 Pods Per Pack
Each pack includes three replacement pods at your chosen resistance. At 15+ refills per pod, a single 3-pack can last over a month of regular use depending on e-liquid sweetness and usage frequency. Fruit and menthol e-liquids tend to extend coil life, while very sweet dessert profiles will reduce it.
Specifications
Product
OXVA NeXLIM Replacement Pod
Pack Quantity
3 pods per pack
Pod Capacity
4mL (CRC Canadian version)
Coil Type
Built-in dual mesh (non-replaceable)
Available Resistances
0.6 ohm, 0.8 ohm, 1.2 ohm
Coil Technology
Unitech 2.0
Pod Material
PCTG (clear body)
Connection
Magnetic
Fill System
Top fill (silicone stopper)
Leak Protection
5-layer leak-proof structure
Estimated Lifespan
15+ refills per pod
Compatible Device
OXVA NeXLIM only
Made By
OXVA
Choosing Your Resistance
0.6Ω RDL / Loose Draw
20 – 40W
Warmest vapour, biggest clouds
Open, airy draw
Best with 50/50 or 60VG e-liquid
Higher e-liquid consumption
Best for: Cloud-focused vapers, RDL style, 10-20mg nic salt
0.8Ω MTL / RDL Versatile
12 – 32W
Balanced vapour and flavour
Medium-tight draw
Best with 50/50 nic salt at 10-20mg
Moderate e-liquid consumption
Best for: Most vapers, all-day carry, the recommended starting point
1.2Ω MTL / Tight Draw
10 – 25W
Discreet, cooler vapour
Tightest, cigarette-like draw
Best with 50/50 nic salt at 20mg
Lowest e-liquid consumption
Best for: Ex-smokers, MTL purists, maximum battery life
NeXLIM Pods vs. XLIM Pods at a Glance
Feature
NeXLIM Pod
XLIM V3 Top Fill Pod
Coil Design
Dual mesh (2 coils)
Single mesh (1 coil)
Capacity
4mL
2mL (CRC)
Fill System
Top fill
Top fill
Estimated Lifespan
15+ refills
7-10 refills
Leak Protection
5-layer
Standard
Resistance Options
0.6, 0.8, 1.2 ohm
0.6, 0.8 ohm
Compatible Device
NeXLIM only
XLIM Pro 3, GO 2, others
Cross-Compatible
No
No
E-Liquid Pairing Guide
NeXLIM pods work with both nicotine salt and freebase e-liquids. The ideal pairing depends on your chosen resistance:
Resistance
Recommended VG/PG
Recommended Nicotine
0.6 ohm
50/50 or 60VG/40PG
10-20mg nic salt or 3mg freebase
0.8 ohm
50/50
10-20mg nic salt
1.2 ohm
50/50
20mg nic salt
Tip: Avoid e-liquids above 70VG in any NeXLIM pod. High-VG liquids are too thick for pod-style wicking ports and will cause dry hits and shortened coil life. Stick to 50/50 or 60/40 for best results. Browse our e-liquid collection for compatible options.
How to Replace and Fill a NeXLIM Pod
Remove the old pod. Pull the used pod straight up from the NeXLIM device. The magnetic connection releases cleanly. Dispose of the used pod responsibly.
Open the new pod. Take a fresh pod from the 3-pack. Locate the silicone stopper on the top of the pod and lift it open to expose the fill port.
Fill with e-liquid. Insert your bottle tip into the fill port and squeeze gently. Fill to just below the maximum line, leaving a small air gap. Close the silicone stopper firmly.
Prime the coil. Let the filled pod sit for 5 minutes before your first puff. This allows the e-liquid to fully saturate both mesh coils. Skipping this step risks a dry hit that can permanently damage the coil.
Insert and vape. Slide the pod into the NeXLIM device until the magnets click into place. The device will detect the resistance automatically and adjust. Draw on the mouthpiece or press the fire button to vape.
Related Products
OXVA NeXLIM Go Pod Kit – The device these pods are made for, with 1500mAh battery and dual mode Eco/Boost system
E-Liquids – Browse nic salts and freebase e-liquids compatible with NeXLIM pods
Flavour Beast Nic Salt 60mL – 40+ flavours in a 40VG/60PG formula that pairs well with 0.8 and 1.2 ohm pods
All Pod Systems – Compare the NeXLIM with other open pod kits
All Replacement Pods and Coils – Browse pods and coils for all devices
Why Buy from Vape Cloud?
Canadian Owned and Operated – Shop in CAD, support local business
Retail Locations Across Ontario – Pick up in-store at Sudbury, Brantford, Sarnia, Simcoe, North Bay, and more
Free Shipping Over $100 – Fast delivery across Canada
Authentic OXVA Products – Sourced through authorized Canadian distribution
Age Verified Delivery – Strict 19+ compliance on every order
Frequently Asked Questions
Do NeXLIM pods fit the XLIM Pro 3 or XLIM GO 2?
No. NeXLIM pods are designed exclusively for the OXVA NeXLIM device. They are not compatible with the XLIM Pro 3, XLIM GO 2, or any other OXVA XLIM kit. Similarly, XLIM pods (V2, V3, EZ) do not fit the NeXLIM. The two pod systems use different form factors and are not interchangeable.
How long does each pod last?
OXVA rates each NeXLIM pod for 15+ refills, which translates to roughly 60mL of e-liquid per pod. In practice, lifespan depends heavily on your e-liquid. Fruit and menthol flavours tend to be gentle on coils and can reach 15+ refills. Very sweet dessert and custard profiles contain more sweetener, which gunks coils faster and may reduce lifespan to 8-12 refills. When flavour starts tasting muted or you catch a slight burnt note, it is time to swap the pod.
Can I replace just the coil inside the pod?
No. NeXLIM pods use built-in (integrated) dual mesh coils. When the coil reaches the end of its life, you replace the entire pod cartridge. This design allows OXVA to optimize the coil-to-pod seal for better leak resistance and consistent performance, but it does mean the pod and coil are one unit.
Which resistance should I choose?
Start with the 0.8 ohm if you are unsure. It is the most versatile option, working well for both MTL and light RDL vaping with 50/50 nic salt at 10-20mg. Choose 1.2 ohm if you want the tightest, most cigarette-like draw with maximum battery efficiency. Choose 0.6 ohm if you prefer warmer, denser clouds with an open, airy draw. The NeXLIM kit comes with a 0.6 and 0.8 ohm pod included, so you can try both before buying replacement packs.
What e-liquid works best with NeXLIM pods?
50/50 VG/PG nicotine salt at 10-20mg is the ideal pairing for all three resistances. The 0.6 ohm pod can also handle 60VG/40PG blends. Avoid anything above 70VG, as thick liquids will not wick properly in pod-style coils and will cause dry hits. Freebase e-liquid at 3-6mg also works, particularly in the 0.6 ohm pod for a direct-to-lung style. Browse our e-liquid collection for compatible options.
What is the difference between Eco and Boost mode on the NeXLIM?
Eco and Boost are power modes on the NeXLIM device, not the pod itself. Both modes use the same dual mesh pod. In Boost mode, both mesh coils fire simultaneously for maximum flavour and vapour. In Eco mode, the coils alternate to conserve battery and extend pod lifespan. You can switch between modes on the device regardless of which pod resistance you use.
How do I know when to replace the pod?
Replace the pod when you notice any of these signs: flavour tastes muted or dull compared to when the pod was fresh, you detect a slightly burnt or off taste even with a full pod, vapour production has noticeably decreased, or the e-liquid appears darker than usual inside the pod (indicating burnt residue). Running a worn-out coil will not improve and will only make the experience worse.
Age Restriction: This product is intended for adults 19 years of age or older. Age verification is required at checkout and upon delivery in compliance with Canadian law.
